August 17, 2017, 21:23:30
News: Skyartec for 9x project is now up

LunarFlow R/C



Author Topic: Blade 130X  (Read 3755 times)

chris

  • Administrator
  • Newbie
  • *****
  • Posts: 37
    • View Profile
Blade 130X
« on: June 18, 2013, 23:31:02 »
Project 130X.

Had a Rakon DFC CNC head that was not square from the factory so I pounded on it with a hammer to make it straight.  :)

It appears to be possible to use an S107 tail motor to repair/replace the 130x servo motor.  The S107 motor is 4mm and the servo motor is normally 5mm so there is some extra space.  I used a piece of 1.5mm carbon rod to take up the extra space and it seems to work fine.  I may try to find some other method of holding the motor in place.  Also, rumour is that some S107 clones have 5mm tail motors.
« Last Edit: June 26, 2013, 14:58:56 by chris »

 


© 2017 Lunarflow
© 2017 Simple Machines